Setting up your own printer

If you purchased/rented your own Epson TM-C3500 or Epson Colorworks C4000e printer you can use this article as a guide to setting up your printer for the very first time.

Steps in setting up your printer

To set up your Epson TM-C3500 or Epson Colorworks C4000e printer ready for your event with the use of the Let's Get Digital Badge Printing software you will need to carefully complete the following steps listed below:

1. Open your dedicated Windows laptop for the printer you are about to set up.

2. Turn on the printer and connect to the Windows laptop

3. Download and install the TM-C3500 Printer Driver (64bit) Ver.2.6.0.2 or the CW-C4000e Printer Driver (64bit)

4. Download and start the Let's Get Digital Badge printing software

The software can be downloaded here.

Trouble shooting & setting-up

Use the following two documents to start scanning & for troubleshooting. We advice you to print them both.

115KB

Badge Printing - How to set-up your first print.pdf

pdf

859KB

Badge Printing - Troubleshooting Guide 20250327.pdf

pdf