> For the complete documentation index, see [llms.txt](https://knowledge-base.letsgetdigital.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://knowledge-base.letsgetdigital.com/check-in-and-badge-printing/setup-your-own-printer.md).

# Setup your own printer

This guide explains how to set up your badge printer and connect it to the Let's Get Digital badge printing software.

If you are using your own or a rented printer for your event, follow the steps below to ensure everything is installed and ready before your event begins.

### Before you begin

Make sure you have the following:

* A **Windows laptop** dedicated to badge printing
* Your badge printer and its power cable
* A USB cable to connect the printer to your laptop
* A stable internet connection
* Access to your event's Let's Get Digital admin panel
* A mobile device with the Let's Get Digital app installed

#### **Supported printers:**

* Epson TM-C3500
* Epson ColorWorks C4000e
* Brother QL-1100C
* Zebra ZD421

### Step 1: Connect your printer

1. Connect your **Windows laptop to a stable internet connection**.
2. Connect your printer to a power supply.
3. Turn on the printer.
4. Connect the printer to your Windows laptop using the appropriate cable.
5. Make sure the printer has the correct labels or badge paper loaded.

### Step 2: Install the printer driver

A printer driver allows your Windows laptop to communicate with the printer.

Select your printer model below and download the corresponding driver.

| Printer model    | Driver (Software)                                                                                                                                           |
| ---------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Epson TM-C3500   | [**TM-C3500 Printer Driver (64bit) Ver.2.6.0.2**](https://support.epson.net/setupnavi/?PINF=swlist\&OSC=WS\&LG2=NL\&MKN=TM-C3500)                           |
| Epson C4000-E    | [**CW-C4000e Printer Driver (64b**](https://download-center.epson.com/softwares/?device_id=CW-C4000e)                                                       |
| Brother QL-1100C | Should go automatically, but in case it doesn't use [this link](https://support.brother.com/g/b/downloadtop.aspx?c=nl\&lang=nl\&prod=lpql1100euk)           |
| Zebra ZD421      | [**ZDesigner Printer Driver**](https://www.zebra.com/gb/en/support-downloads/printers/printer-drivers.html?downloadId=4fd677df-5ae1-4e2f-89ce-f33134dc1e70) |

**Installing the driver**

1. Open the download link for your printer model.
2. Download the driver compatible with your Windows laptop.
3. Open the downloaded installation file.
4. Follow the on-screen installation instructions.
5. Complete the installation and restart your laptop if requested.

**Note:** Windows may automatically install the driver for the Brother QL-1100C. If this happens, you can skip the manual driver installation.

### Step 3: Install the Let's Get Digital badge printing software

Once your printer driver has been installed, you can install the Let's Get Digital badge printing software.

1. Click the link below to download the latest version.\
   **Download the latese**
2. Open the downloaded file.
3. Follow the installation instructions.
4. Launch the badge printing software.

[**Download Let's Get Digital badge printing software**](https://live.letsgetdigital.com/misc/badgeprinting/software/download)

When you open the software, a QR code will appear on your laptop screen. You will use this QR code to connect the software to your event.

### Step 4: Connect the software to your event

To connect your badge printing software, you will need the Let's Get Digital mobile app.

**Log in to the app**

1. Open your event's admin panel.
2. Navigate to the dashboard.
3. Locate the QR code used to log in to the Let's Get Digital app.
4. Open the Let's Get Digital app on your mobile device (or your Branded app if you have one).
5. Scan the QR code to log in.

**Connect the badge printer**

1. Open the **Let's Get Digital app** on your mobile device.
2. Tap **Menu**.
3. Select **Organiser tools**.
4. Tap **Connect badge printer**.
5. A QR code scanner will open on your mobile device.
6. Scan the QR code displayed in the badge printing software on your Windows laptop.
7. The badge printing software will automatically connect to your event.

Your badge printing software is now connected and ready to use.

### Step 5: Check your badge settings

Before printing, make sure the correct badge type is selected in your event's admin panel.

The badge type determines which badge layout will be used when printing.

**Important:** Selecting the wrong badge type may result in an incorrect badge layout or printing issues.

### Step 6: Test your badge printer

We strongly recommend completing a test print before your event.

1. Make sure your printer is switched on and connected to your laptop.
2. Check that the Let's Get Digital badge printing software is running and connected to your event.
3. Open the Let's Get Digital app.
4. Select **Check-in/out users**.
5. Scan the check-in QR code of a test attendee.
6. Check whether the badge prints correctly.

**Check the following:**

* The badge prints on the correct paper or label.
* All attendee information is visible.
* The text and images are correctly aligned.
* The badge is printed at the correct size.
* The entire badge is printed without any missing sections.

If everything prints correctly, your setup is complete!

## Trouble shooting & setting-up

Use the following two documents to start scanning & for troubleshooting. We advice you to print them both.

{% file src="/files/xUuV670sVrhz6fNmFhQk" %}

{% file src="/files/icJYP1mA75tTa7Xjvazt" %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://knowledge-base.letsgetdigital.com/check-in-and-badge-printing/setup-your-own-printer.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
